Razer DeathAdder elite vs Chroma:

today I will give you detailed information about Razer DeathAdder elite vs Chroma So be with us till the end. let start!

Razer DeathAdder is a titan of the PC gaming mouse community, considered the most popular gaming mouse ever created and certainly the best-selling Razer peripheral.

A common question for anyone who wants to choose a DeathAdder is what is the difference between the versions. Which DeathAdder is better?

I’ll compare both mice in a direct comparison between Razer Deathadder Elite and Chroma to highlight which one is the best for you.

Razer DeathAdder Elite vs Chroma specification overview

Let’s get bogged down in detail with each of the characteristics of these mice. It is important to note that the Elite was launched in 2017 and Chroma was launched in 2014. This ends up playing a role in the characteristics of each.

Sensor

Razer is very silent about the sensors his mice use. This is something that has annoyed mouse enthusiasts for a long time. However, when dismantling the Elite to view the sensor, most agree that it is likely to be a PMW3389.

The PMW3389 has superior optics and, as Razer advertises, allows up to 16,000 DPI and has a resolution accuracy of 99.4%. I wouldn’t worry about hearing these numbers as nobody uses a 16,000 DPI mouse.

You can be sure that you can get the desired PPE, be it 400/800/1600. As for the accuracy of the resolution, it would have been nice if they had provided some examples of how they measured it.

Aside from Razer on the best advertising, you can be sure that the PMW3389 is a superior lens and you won’t find any obvious difference between it and any Zowie (Avago 3310 / PMW 3366) or Logitech (PMW3366) mouse.

As for the DeathAdder Chroma, it has 3989, which is slightly older than the PMW3389 used by the elite. It supports up to 10,000 DPI, but the only real difference between these two sensors is that Elite PMW3389 solves the tilt bump problem.

The tilt shot is when you lift the mouse very quickly and slide in any direction. On older sensors, you can spin the cursor, which can become a problem if you are the type that scrolls the mouse a lot.

This can happen more if you play with a low DPI like 400/800. This is not a problem that Chroma suffers on its own. Zowie also has this problem on all of his mice using the Avago 3310. However, this should not be a determining factor in any mouse decision, as the problem is not a big problem.

The sensor is the main difference between these two mice and arguably the most important part of choosing a mouse. The Elite has the best and most up-to-date mouse sensor here, so it wins in this category.

Winner: Elite

To form

One of the reasons why the DeathAdder series has become so popular is its form. The mouse adapts to any style of grip, whether you are a user with a palm grip, claw grip, or fingertip grip.

There are deep thumb grooves under the side buttons for easier grip and the mouse hump is in the center of the case. This provides excellent support for users with grip on the palm.

Both mice are exactly the same in terms of size, shape, and weight, so there isn’t much to compare in this category.

  • Dimensions:
  • Length: 11cm
  • Height: 4.2 cm.
  • Weight: 98g
  • Handle width: 6.1 cm.
  • Back width: 6.9 cm.

DeathAdder series are considered medium to large mice, so they are suitable for people with slightly larger hands. I would recommend it for the hand size of about 17.5-20cm.

The weight of the elite Razer DeathAdder is 98g, which is high enough for a competitive mouse. Compared to Logitech G403 (90g), Zowie FK2 (85g), or Logitech G Pro Wireless (80g).

If you like heavier mice, this is not a problem, but pay attention to the weight that DeathAdder has compared to these mice, as weight is one of the four most important characteristics to choose a mouse that fits the size of the hand and plug.

Overall, Razer has decided to stick with what works, so Elite remains the right choice for the best sensor.

Winner: Elite

Conclusion:

The mouse 1 and mouse 2 of both mice are tactile and have an average travel time. They are omron switches known to be one of the best on the market.

The switches are said to have a longer lifespan on the Elite than the Chroma. They are not separate from the shell, so keep that in mind if that’s your preference.

Chroma has had many problems with the durability of its switches. There are many threads in the Razer and Reddit forums with users complaining about double-clicking switches.

When you press mouse 1 or mouse 2, the switches register a double click. This is something that DeathAdder Elite seems to be tackling.

As for the side buttons, Razer has slightly modified them on the Elite, as they have a more structured appearance than the Chroma. This isn’t necessarily better, but it might provide more grip if you have sweaty hands.

The side buttons of the Elite are more tactile and feel more responsive. Chroma buttons are said to swing a little, which is no longer a problem on the Elite.

One of the most noticeable differences between the two is that the Elite has DPI buttons on the top of the mouse. This makes it much easier to change the DPI on the fly than the Chroma.

The trackball also had a makeover on the DeathAdder Elite. It has small dimples on the wheel to help with the grip. The wheel also appears to have less tension and the notches are less pronounced. This depends on your personal preferences about which you will like the most.

Winner: Elite

The extras

Both Elite and Chroma have a take-off distance of about 1 DVD, so there will be no problem with scrolling or rotating the mouse. The paws of the mouse are slightly larger in DeathAdder Elite, which can provide better smoothness.

As for RGB lighting, there is no obvious difference between the two models, so it shouldn’t be a determining factor in helping you decide. The available settings are a spectrum, breathing, static, and reactive.

Both mice can use Razer software to create macros, reconnect buttons, and more.

The cable is an often overlooked feature of a mouse and it is important to know the type of cable you are receiving. The more flexible a cable is, the better. The DeathAdder Elite cable is definitely more flexible. This is important to reduce cable friction and friction, especially if you are not using an elastic mouse.

The verdict

Overall, the Razer DeathAdder Elite is basically a better-redefined version of the Razer DeathAdder Chroma. The Elite has a better sensor, which is the most significant difference between these two.

But aside from that, Razer has added many quality-of-life features to the Elite, like the best grips, DPI buttons, and smoothest body texture.

If you’re on the fence between putting these two together, it’s obvious. Choose the Razer DeathAdder Elite.

If you already have the Chroma and are trying to update it, for now, I will stay until the Chroma breaks. Unless I can afford the $ 70 price, I don’t think it’s worth the switch to the Elite.

Elite                        VS                                                  Chroma

 

Frequent questions

 

Does Razer DeathAdder Elite support MAC OS?

Yes, both Elite and Chroma are compatible with MAC OS. Razer Synapse is MAC compatible, so you can perform all macro changes and button programming with OSX.

Does Razer Chroma have brighter and more colorful RGB lighting?

No, the differences between these two in terms of RGB lighting are negligible. You won’t see much difference between the two, so this shouldn’t influence your decision on what to choose.

 

 

 

Leave a Reply